Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
HI my name is Tanner from Fort Mac
06-01-2015, 03:02 PM,
#1
HI my name is Tanner from Fort Mac
Hello guys, my names Tanner Whalen, I'm a member of The jeeps of McMurray group. I heard about TNT through that page, and I heard about the Ace as well. I am hoping to be able to attend this year as it sounds fantastic. I fairly new to the off road scene and haven't been too crazy on the trails. Would love to get out and run some trails with others who share the same passion.

I myself have a vehicle not typically seen too often in the 4x4 scene. I have a 2006 Jeep Grand Cherokee Wk. I have the 2. 25 lift with 265/70r17 MT 10ply tires, and am fully equipped for most issues. Hoping to have the winch installed in the next few months. [img][Image: DSC_0015.jpg][/img]
Find all posts by this user
Quote this message in a reply
06-02-2015, 11:49 PM,
#2
RE: HI my name is Tanner from Fort Mac
The Mac guys will have a nice convoy down to ace this year welcome aboard!!
Daily Driver 1990 Chevrolet Full Size Blazer on 33' Baja Claws.
Trail rig '84 GMC Jimmy 350 TBI, SM465, NP205, Corperate 10 bolt 30 spline axles, Strange Spool in the back (and soon front), 6' Lift, Sitting on 38.5 Ground Hawgs.
Find all posts by this user
Quote this message in a reply
06-03-2015, 05:56 AM,
#3
RE: HI my name is Tanner from Fort Mac
Welcome Tanner! It's good to see different rigs come out. Big Grin
Soccer Mom's-'12 Sliver Rubi Unlimited on 35 w/ 3" Zone, Bumper'n'winch and LEDs
Old trial rig-('06 Rubicon, long arm, 39.5" Iroks, RCV's front-alloy rears and a 6hp Warn 8274) -  sold to a good friend  Big Grin
New trail rig - '06 Taco Crew, bobbed, locked, on 37"
YouTube Winch Challenge Addict Loony
Find all posts by this user
Quote this message in a reply
06-03-2015, 11:02 AM,
#4
RE: HI my name is Tanner from Fort Mac
Welcome aboard. Hope you have a great time at ACE.
________________
Just your friendly average tech guy. 
Visit this user's website Find all posts by this user
Quote this message in a reply
06-03-2015, 11:56 AM,
#5
RE: HI my name is Tanner from Fort Mac
Welcome to the site Tanner. You need to get a hold of Russel or one of the TNTFM guys and have their approval for ACE as it is a club event and I don't think Jeeps of McMurray is a registered club anymore.
Nice looking rig, hope it all works out and we see you at ACE.

Dmonkey

2003 WJ for groceries, 2005 LJ Rubicon for family wheeling, 2015 Power Wagon for making money, 1989 MJ for working on, 20xx Ultra 4 buggy for dreaming and leaning on.
Find all posts by this user
Quote this message in a reply
06-06-2015, 01:22 PM,
#6
RE: HI my name is Tanner from Fort Mac
Yep, I got the approval from Russel, as well as my confirmation of registration, I'm extremely excited to meet everyone and to see what real wheeling is like, unlike some of the stuff I've seen up here. If you see me on the trails and see a better way, don't hesitate to give me pointers. I'm more then willing to learn and will abide by all rules placed on me Smile
Find all posts by this user
Quote this message in a reply
06-07-2015, 01:06 AM,
#7
RE: HI my name is Tanner from Fort Mac
Glad to hear, see you in GC

Dmonkey

2003 WJ for groceries, 2005 LJ Rubicon for family wheeling, 2015 Power Wagon for making money, 1989 MJ for working on, 20xx Ultra 4 buggy for dreaming and leaning on.
Find all posts by this user
Quote this message in a reply
07-23-2015, 02:15 PM,
#8
RE: HI my name is Tanner from Fort Mac
(06-01-2015, 03:02 PM)Sefyfox Wrote: Hello guys,  my names Tanner Whalen,  I'm a member of The jeeps of McMurray group. I heard about TNT through that page,  and I heard about the Ace as well.  I am hoping  to be able to attend this year as it sounds fantastic.  I fairly new to the off road scene and haven't been too crazy on the trails. Would love to get out and run some trails with others who share the same passion.

I myself have a vehicle not typically seen too often in the 4x4 scene.  I have a 2006 Jeep Grand Cherokee Wk.  I have the 2. 25 lift with 265/70r17 MT 10ply tires, and am fully equipped for most issues. Hoping to have the winch installed in the next few months. [img][Image: DSC_0015.jpg][/img]

Welcome Tanner
Pirateflag 07 JKu rolling on 35's, '97 TJ, '83 CJ & a '49 Willys. 
Find all posts by this user
Quote this message in a reply
08-03-2015, 10:17 AM,
#9
RE: HI my name is Tanner from Fort Mac
[Image: IMAG0029.jpg] well it's been a busy few months, I've managed to do slot more with the ol' jeep wk. Since the above picture was taken the following has been done
Rro hidden winch bumper with bush guard, underbody thick steel skid plates, Aussie lockers, OME struts with rusty coils, RRO upper control arms, Moog ball joints, bds rear shocks with rusty's coils, XR off-road series rims with backspacing, super chips flashpaq, hi lift Jack, fire extinguisher, and air lift bags in the rear.
All in all 4-5 lift all around, and should be a very capable machine
Find all posts by this user
Quote this message in a reply
08-03-2015, 10:32 AM,
#10
RE: HI my name is Tanner from Fort Mac
Coming to ACE this year?
________________
Just your friendly average tech guy. 
Visit this user's website Find all posts by this user
Quote this message in a reply
08-04-2015, 04:10 PM,
#11
RE: HI my name is Tanner from Fort Mac
Looking good! Big Grin
Soccer Mom's-'12 Sliver Rubi Unlimited on 35 w/ 3" Zone, Bumper'n'winch and LEDs
Old trial rig-('06 Rubicon, long arm, 39.5" Iroks, RCV's front-alloy rears and a 6hp Warn 8274) -  sold to a good friend  Big Grin
New trail rig - '06 Taco Crew, bobbed, locked, on 37"
YouTube Winch Challenge Addict Loony
Find all posts by this user
Quote this message in a reply
08-05-2015, 08:22 PM,
#12
RE: HI my name is Tanner from Fort Mac
On my way now!
Find all posts by this user
Quote this message in a reply
08-25-2015, 01:58 PM,
#13
RE: HI my name is Tanner from Fort Mac
Enjoyed seeing this rig at ace, I hope it performed well.
TJ for wheeling, Superduty for work, VW Passat for the highway, Yamaha FZ6 for riding, Polaris mountain mod for fun
Find all posts by this user
Quote this message in a reply


Forum Jump: