Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Lord Jeepus
03-22-2016, 11:38 PM, (This post was last modified: 03-23-2016, 09:21 AM by Sasq40.)
#1
Lord Jeepus
Figured about time i start my build thread.Going to have to look around for all the pictures of stuff I've done. Found this tj on kijiji for a decent price with the basics so bought it up nice and cheap. Little did i know why it was, only found out why after a year or so, ill get to that later ha. Bought it with exhaust on it, 31s and a 2" budget procomp lift.
[Image: 20150110_164504.jpg] How she looked when i bought it

[Image: 20150110_163145.jpg] Fixing some damage from the p/o, looked like he tried to pull something with the bumper and mangled the mounting points
 From there i added bumpers,winch and some lights( a few more then i planned after selling my truck and keeping the lights) I found a good deal on some diffs from flordia that were already built. They were tj44s that were geared to 4.88, ox lockers,histeer,warn hubs, setup for c/o,chromoly shafts. 
Started with the simples things, i gutted the rear and sprayed bedliner, fixed some body damage with some new corner guards and flush mounted some leds.
[Image: FB_IMG_1442685900288.jpg][Image: FB_IMG_1442696398777.jpg][Image: 20160218_170529.jpg][Image: att_1430191512647160.jpeg]

Wheeled a few times and learned a few things (like how to change a clutch) and
[Image: FB_IMG_1438036349772.jpg] Was a little deeper then expected

 after a trip to grande cache found out why it was so cheap, cancer! 
[Image: IMG_20150920_192501_1.jpg] Snow in september [Image: 20150923_184133_1.jpg] First time I noticed the rust after gc
Find all posts by this user
Quote this message in a reply
03-22-2016, 11:58 PM, (This post was last modified: 03-23-2016, 09:20 AM by Sasq40.)
#2
RE: Lord Jeepus
The rust didn't seem like it was to bad at first till me and my builder, Mr Levi Gray, got down to business. I parked it till i had money for the coil overs then brought it home to get started!
[Image: 20160122_135759.jpg]Making its way home from the farm
[Image: 20160128_133025.jpg] First of my parts to come in courtesy of tmr
After seeing the full extent we got busy. Started with cutting off all the old brackets. We then made plates to go over the sides and bottom of the frame.
[Image: 20160126_163414.jpg]

[Image: 20160129_180103.jpg]
 After a bunch of long days we had the frame all done, we moved onto the arm brackets. I purchased the rock krawler x factor 3 /4 link kit, figured it be easier then trying to fab our own suspension, looking back probably would have been better to do our own kit, but well get to that later. 
[Image: 20160301_154953.jpg] The plate is welded in and bolted, I did the not so great welding on this, im still learning and figured this piece wasn't as important so levi let me practice. 

Well waiting for Levi to be able to come over again I worked on a few things i could unsupervised :P
[Image: 20160307_134927.jpg] painting up our diy beads [Image: 20160229_143534.jpg]  [Image: 20160229_143549.jpg] installed my first sye, not as bad as i thought [Image: 20160218_205117.jpg] getting my boats figured out, bent them a little more from this [Image: 20160216_135522.jpg] Dogs wondering when the jeep will be done!
Find all posts by this user
Quote this message in a reply
03-23-2016, 09:14 AM, (This post was last modified: 03-23-2016, 09:23 PM by Sasq40.)
#3
RE: Lord Jeepus
After getting the frame and brackets done, we moved onto the coil overs.We tackled the rear and after some figuring had it pretty good.
[Image: 20160323_210930.jpg]

[Image: 20160323_210935.jpg]
[Image: 20160308_152408.jpg] Testing tire clearance
The front was a little more of a pain. 
[Image: 20160315_145827.jpg] Fabbing up locations.
[Image: 20160323_210832.jpg]

[Image: 20160323_210846.jpg]
[Image: 20160323_210908.jpg]
We spent a day setting up the track bar that we got from tmr, then we went for the hoops. Sure was nice to get the jeep on its own weight. .
[Image: 20160317_171757.jpg]

One problem we found was the arms are bent higher for clearance, great i thought when i ordered them, but after checking clearances we quickly found out some issues with the arm, up travel was a lot less then we had hoped for because the arm hit the frame! Duh leason learned.[Image: 20160307_135649.jpg] Any issue were having is using the recommend arm length there is some serious issues with the pinion angle, so another thing were fighting with.At the moment were working on the annoying little things, repair some rusty body mounts, painting, redoing brake lines and a bunch of other little things.
Find all posts by this user
Quote this message in a reply
03-23-2016, 09:15 AM,
#4
RE: Lord Jeepus
Will have to get a few more pics of the mounts and add them in!
Find all posts by this user
Quote this message in a reply
03-23-2016, 09:19 AM,
#5
RE: Lord Jeepus
For some reason the pictures shows up fine when I'm not logged in, but some reason is just links when I'm logged in, any ideas. The way I posted them genereally work on other forums
Find all posts by this user
Quote this message in a reply
03-23-2016, 03:30 PM,
#6
RE: Lord Jeepus
I dunno man, I've been seeing all the ones you've posted so far.
________________
Just your friendly average tech guy. 
Visit this user's website Find all posts by this user
Quote this message in a reply
03-23-2016, 09:13 PM,
#7
RE: Lord Jeepus
yeah thats what levi said, wierd thing is doesnt show up on my end, o well lol i know what it looks like
Find all posts by this user
Quote this message in a reply
03-23-2016, 10:12 PM,
#8
RE: Lord Jeepus
Pics look great, nice build. You guys should come over and work on my junk when you get done.

Dmonkey

2003 WJ for groceries, 2005 LJ Rubicon for family wheeling, 2015 Power Wagon for making money, 1989 MJ for working on, 20xx Ultra 4 buggy for dreaming and leaning on.
Find all posts by this user
Quote this message in a reply


Forum Jump: